|
With the purchase of ABM Mobile Factories, you will be able to:
1. Start a very profitable business in steel construction.
2. Build steel buildings for your own use or for other customers for unlimited applications at a very high speed, at nearly half the cost of conventional buildings.
The ABM Mobile Factory is taken to the construction site and a team of 10 to 12 workers will be able fabricate right on the site 30 to 60 cm wide arches from high quality galvanized and pre-painted steel coils at a very high speed. These arches are seamed together by a motorized seamer into totally waterproof building with span of up to 30 meters width without any intermediate support. The ABM arches seamed together are used either as a complete building or a roof over conventional walls.
With ABM MOBILE FACTORIES, a one thousand square meter building can be fabricated on-site and erected in one day at less than half the cost of conventional buildings.
LOW PRESSURE POLYURETHANE FOAM
INJECTING MACHINE
I Machine code: SM-30 (other flux is available)
II Description of the machine
This injecting machine is mainly used for continuous injecting rigid or soft polyurethane foam for various thermal insulation purposes.
This machine is controlled by PLC, high accuracy, simple operation, convenient maintenance. When pre-set first injection is finished, the alarming relay will give alarms.
III Main technical data
3.1 Main pump motor power: 5.5kW
3.2 Mixing motor power: 0.55kW
3.3 Hydraulic pump motor power: 2.2kW
3.4 Auto glue filling motor power: 1.5kW (two set for two tanks)
3.5 Flux: 5~30kg per minute
3.6 Capacity of the tanks for polyurethane glue: 180kg each, auto filling glues
3.7 PLC automatic control: PLC programmable, automatically heating, injecting, cleaning and blowing; Special PLC system from Chinese domestic which can save 99 programs.
3.8 Equipped piston type counting pump: HJ30-50 (two), adjusting accuracy 0.05%.
3.9 Generating pressure: 8-10MPa (one 0.8 m3 air compressor is equipped by buyer)
3.10 Machine weight: about 800kg
3.11 Dimension: 1370mm x 1350mm x 2250mm
HIGH PRESSURE POLYURETHANE FOAM INJECTING MACHINE
I Machine Code: SM220
II Description of the machine
This injecting machine is mainly used for continuous injecting rigid or soft polyurethane foam products such as sofa pillow, car seats and furniture, etc.
This machine is controlled by PLC, high accuracy, simple operation, convenient maintenance. When pre-set first injection is finished, the alarming relay will give alarms.
III Main technical data
3.1 Main pump motor power: 15kW x 2
3.2 Mixing motor power: 0.55kW (installed inside A tank)
3.3 Hydraulic pump motor power: 2.2kW
3.4 Flux: 40-400kg per minute
3.5 Injecting time: 0.1-99.9s
3.6 Injecting pipe high pressure protected by pressure gauge with electric contact
3.7 Filters for Polyol and ISO glues: DN110 self-clean filter
3.8 Hydraulic station: hydraulic tank 20L, integrated with over-flow valve, safety valve, pressure gauge, discharge valve, electromagnetic valve, anti-shock pressure gauge, etc.
3.9 High pressure mixing head: developed by ourselves, high precision, hydraulic control, L type, self-clean, solvent free, life is more than 300 thousand times (if more than 300 thousand times, this head can be repaired and used again); Outer diameter of the nozzle: 24mm.
3.10 Temperature control system for tanks: the two tanks are heated by waters in the interlayer of the tanks; Equipped with two 2kW heaters; Electronic numeric displayer temperature controller is equipped to keep invariable temperature needed for glues.
3.11 Pressure pipes are chosen from Chinese domestic qualified supplier.
3.12 Auto-filling devices for two tanks: two self-absorbing pumps, motor power 1.5kW each.
3.13 Capacity of the tanks for polyurethane glue: 180 kg each
3.14 PLC automatic control: PLC programmable; Special PLC system from Chinese domestic which can save 99 programs.
3.15 Equipped piston type counting pump: adjusting accuracy 0.05%.
3.16 Generating pressure: 80-100MPa
3.17 Suspending arm length 2.5m, rotated in 270°, horizontal injecting or vertical injecting.
3.18 Dimension:
Main body: about 1590 x 1200 x 2400mm
Tanks: 720 x 1550 x 2400mm
3.19 Weight: about 2500kg
 
 
| Description： |
POLYURETHANE FOAM MACHINE |
Item No： |
SM20F-Y7~10 |
| Comment： |
APPLICATIONG:
Used for production of horniness and semi-horniness,such as instrument plate ,cold locker,pipe in the pipe ,active cold storage board,etc.
FEATURES:
1.Right measurement:use measure pump with slow speed and high precision ,when temperature,pressure and viscosity fluctuate ,mixed proportion isnt changed and can teach highest ratio of quality goods.
2.Structure of pour point is advanced ,performance reliable ,operation convenicent,maintain simply and be able to move in the divection of front ,back,left,right,upper and below.
3.Control pourong quantity by computer and clear automatically.
|
使用条件/WORKING CONDITION
|
查看主要参数/MAINPARAMETERS |
名称
Raw materials |
重量混合比
Mixing ratio in weight |
料温℃
Material temp,℃ |
粘度
viscosity(cps) |
密度
Density,(g/cm3) |
A料：多元醇、发泡剂、催化剂、匀泡剂、填料等
Material A:polyol ,foaming,agent,activater,equalizing agent,etc
|
100 |
20-25 |
<2000 |
1.1-1.4 |
B料：聚合MDI(PAPI)
Material B:MDI-semi-prepolymer |
100-110 |
25-30 |
100-300 |
1.2 | 型号及吐量/MODEL AND OUTPUT CAPACITY
|
查看主要参数/MAINPARAMETERS |
| 序号NO |
项目Items/浇注机型号Model |
SM20F-Y7 |
SM20F-Y8 |
SM20F-Y9 |
SM20F-Y10 |
| 1 |
总浇注量Kg/min(g/s)
Total pouring volume(kg/min)(kg/s) |
60-180(1-3) |
90-270(1.5-4.5) |
150-450(2.5-7.5) |
200-600(3.3-10) |
| 2 |
生产制品重量g
Weight of product(kg) |
5-60 |
10-90 |
15-120 |
20-200 |
| 3 |
料罐容积（升）
Tank capacity(l) |
200 |
300 |
500 |
800 |
| 4 |
浇注头搅拌转速r.p.m
Revolving speed of blending(r.p.m) |
6300 |
6300 |
4000-6000 |
4000-6000 |
| 5 |
总功率（kw）
Total power(kw) |
20 |
30 |
40 |
50 |
| 6 |
外形尺寸（长x宽x高）
outline size,LxWxX,(m) |
22x3 |
2.5x2.5x3 |
3x3x3.5 |
3.5x3.5x3.5 |
| 7 |
重量（kg）
Weigh,(kg) |
1200 |
1500 |
2000 |
2500 |
|
