|
Brief Introduction:
Here is video of our eps sandwich panel line as below
http://v.jingtime.com/show/JAHGYDYK.shtml
This line is suitable for producing roof & wall sandwich panel, laminating foam or rockwool with color steel on both sides by glue.
It is comprised of mechanical decoiler (max. capacity 5 tons), forming machine (profile according to requirements), side wall decoiler & side wall forming machine (when producing rockwool sandwich panel, these two devices are needed), adhesive applying system, laminating machine, following cutting device and unloading rack (manual type).
Outline: 
Profile:
Main Technical Data
1 Total power: 28kW
2 Main driving power: 1.5kW
3 Main forming motor power: 3kW
4 Cutting motor power: 4kW
5 Diameter of main driving rubber roller: 150mm; width:
1220mm
6 Diameter of forming roller’s shaft: 75mm
7 Total length of the line:
Main machine: 36 meters
Unloading table: as your want
8 Dimension of forming machine: 11m x 1.6m x 1.3m
9 Dimension of laminating machine: 12.9m x 2.23m x 2.8m
10 Profiles can be produced: six (refers to attached
drawing)
11 The core thickness for plain sandwich panel:
EPS (PU): 50-250mm;
Rockwool: 40-100mm
12 The core thickness for corrugated sandwich panel:
EPS (PU): 50-150mm;
Rockwool: 40-70mm
13 Max. forming width of plain sandwich panel: 1.2m
14 Max. usable width of corrugated sandwich panel: 0.95m
15 Production speed: 0-3.5m/min
16 Total weight of the line: about 26 tons
17 PLC control system from Taiwan
|
